Heliatos Freeze Protected Solar Water Heater Kit

Specs

Materials

Glazing: UV resistant twin wall polycarbonate
Frame: Architectural grade aluminum alloy 6063
Insulation: Polyiso foam (meets requirements for ASTM-C1289, Type 1
specification)
Water Conduit: Copper Tubing (Alloy C12200 certified for public water supplies
meeting EPA Lead and Copper Rule 56 FR26460, June 7th, 1991)
Fittings: Brass, Lead Free compliant with Federal Reduction of Lead in
Drinking Water Act , Dezincification resistant
Seals: Butyl Rubber

Physical

Length: 24.0 Inches
Width: 25.25 Inches
Height: 2.125 Inches
Active Collector Area: 3.674 ft2
Mounting Hole Spacing: 24.75 x 17.00 Inches x Inches
Volume of Liquid in Collector: 7.7 fl. oz.
Total Panel Weight: 11.6 lb.
Input and Output Connections: 3/8 “ Compression Fitting

Maximum Ratings

Pressure: 150 Psi
Collector Temperature: 203 ºF
Mounting Surface Unevenness: ¼ Inch (corner to corner)

Each Kit Comes With:

Your selected quantity of SW-38 Panels
1 Grade A 25W PV panel to power the pumps - NO grid connection required - plus wire and PV mounting kit
1 Heliatos HS-21 Pump for the Glycol Side
1 TopsFlo TD5 Stainless Steel Pump for the Water Side
1 Heliatos Glycol Fill Valve
1 Heliatos Bottom Feed Connector
1 Compact Stainless Steel (Alloy 316) Heat Exchanger
1 Amtrol Expansion Tank
1 Complete Set of Fittings and Adapters
DOWFROST Food Grade Propylene Glycol Heat Transfer Fluid. 2 quarts for kits 4 panels or less. 4 quarts for 5 panels or more.
Instructions for Installation- Single Row
Instructions for Installation- Double Row

All You Have To Supply Is:

Your choice of 1/2" Pipe from the panels to the water heater (Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation

This product fits any existing water heater with a "boiler drain" near the bottom. This includes almost all gas and electric powered residential units.

Please Note - Will NOT work with Marathon Non Metallic (Plastic) Water Heaters.

Heliatos Solar

Heliatos Freeze Protected Solar Water Heater Kit

Name: Heliatos Freeze Protected Solar Water Heater Kit
Brand: Heliatos Solar
SKU: 077.0073
Price: 1399.0 USD
Availability: InStock
Rating: 5.0 (1 reviews)

$1,399.00 $2,590.00

Save $1,191.00

Pay Over Time

Flash Sale Going On Now! Get 5% Cash Back with Code FLASH5 (Enter code in checkout) *Brands Excluded: EWheels, Afikim, Avocado, Green Bike USA, Emojo, Pride, Rambo, DWMEIGI, Fiido, Renogy, SunGoldPower, BougeRV, Cycleagle, Mini Motos, Anyhill, and Jackery
We Match Any Authorized Dealers Price - Call Us Now For The Best Price: (800) 674-3815 Available: Mon-Sun 8AM-8PM EST
Low Monthly Financing Available - Apply For Bread Pay™ Financing In Checkout
Fast and Free Shipping To Lower 48 USA
Limited Stock On Hand. Order Now Before They’re Gone!

Choose Your Panel | Row:

Variant

Quantity:

Flash Sale Ends 11:59PM EST

Specs

Materials

Glazing: UV resistant twin wall polycarbonate
Frame: Architectural grade aluminum alloy 6063
Insulation: Polyiso foam (meets requirements for ASTM-C1289, Type 1
specification)
Water Conduit: Copper Tubing (Alloy C12200 certified for public water supplies
meeting EPA Lead and Copper Rule 56 FR26460, June 7th, 1991)
Fittings: Brass, Lead Free compliant with Federal Reduction of Lead in
Drinking Water Act , Dezincification resistant
Seals: Butyl Rubber

Physical

Length: 24.0 Inches
Width: 25.25 Inches
Height: 2.125 Inches
Active Collector Area: 3.674 ft2
Mounting Hole Spacing: 24.75 x 17.00 Inches x Inches
Volume of Liquid in Collector: 7.7 fl. oz.
Total Panel Weight: 11.6 lb.
Input and Output Connections: 3/8 “ Compression Fitting

Maximum Ratings

Pressure: 150 Psi
Collector Temperature: 203 ºF
Mounting Surface Unevenness: ¼ Inch (corner to corner)

Each Kit Comes With:

Your selected quantity of SW-38 Panels
1 Grade A 25W PV panel to power the pumps - NO grid connection required - plus wire and PV mounting kit
1 Heliatos HS-21 Pump for the Glycol Side
1 TopsFlo TD5 Stainless Steel Pump for the Water Side
1 Heliatos Glycol Fill Valve
1 Heliatos Bottom Feed Connector
1 Compact Stainless Steel (Alloy 316) Heat Exchanger
1 Amtrol Expansion Tank
1 Complete Set of Fittings and Adapters
DOWFROST Food Grade Propylene Glycol Heat Transfer Fluid. 2 quarts for kits 4 panels or less. 4 quarts for 5 panels or more.
Instructions for Installation- Single Row
Instructions for Installation- Double Row

All You Have To Supply Is:

Your choice of 1/2" Pipe from the panels to the water heater (Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation

This product fits any existing water heater with a "boiler drain" near the bottom. This includes almost all gas and electric powered residential units.

Please Note - Will NOT work with Marathon Non Metallic (Plastic) Water Heaters.

Heliatos Freeze Solar Water Heater Kit

Our Heliatos Freeze allows you to install a solar hot water system you can operate year round. This kit includes SW-38 Panels and a Stainless Steel Heat Exchanger with a special food grade heat transfer fluid (DOWFROST) to create a separate freeze protected loop. Filling your separate loop is easy with our Glycol Fill Valve.

Each Kit Comes With:

All You Have To Supply Is:

Heliatos Solar

Heliatos Freeze Protected Solar Water Heater Kit

Each Kit Comes With:

All You Have To Supply Is:

Heliatos Freeze Solar Water Heater Kit

Customer Reviews